5 Steps to Take When a Pipe Bursts at Home

Quick Summary

When a pipe bursts, shut off the water at the main shut-off valve right away by turning its round handle or lever clockwise until it stops. Then cut power to the affected area if it is safe, and limit damage within the first hour by moving valuables and soaking up water.

  • Find and label your main shut-off valve before a burst happens.
  • Turn the main valve clockwise until it stops to close it.
  • If the handle won’t turn, do not force it; call a plumber instead.
  • Cut power at the panel only if it is safe, and never step into standing water.
  • Keep receipts for repairs and cleanup, and call your insurer soon after the burst.

Table of Contents

Shut Off the Water Right Away

When a pipe bursts, every minute counts. The fastest way to limit damage is to stop the water flow at its source.

Last Updated: October 28, 2026

Homeowner turning the main shut-off valve to stop water from pipe bursts in a basement utility room.
Homeowner turning the main shut-off valve to stop water from pipe bursts in a basement utility room.

Locating Your Main Shut-Off Valve

Your main shut-off valve controls water to the entire house.

Look for a round handle or a lever on a pipe. Turn it clockwise until it stops to close the valve. Watch out: if the handle won’t turn, do not force it. Call a plumber instead.

Quick checklist:

  • Find the valve before a burst happens
  • Label it so anyone in the home can find it
  • Keep the path to it clear of boxes and tools

Shutting Off Water to Individual Fixtures

Some bursts affect only one room. In that case, shutting off a single fixture can stop the leak without cutting water to the whole house. Look under sinks and behind toilets for small shut-off valves on the supply lines. Turn them clockwise to close them.

This option works well for a leaking toilet supply line or a sink hose. It does not stop water from a burst in the main line, so check the main valve if the leak continues.

The article’s steps for stopping water flow and limiting damage, at a glance:

Step What to do Timing
Find main valve Locate the round handle or lever and label it Before a burst happens
Close main valve Turn clockwise until it stops Immediately
Close fixture valve Turn clockwise on the sink or toilet supply line If leak is limited to one room
Cut power Shut off power to the affected area at the panel if safe Before touching wet outlets or panels
Limit damage Move valuables, soak up water, run fans Within the first hour

Cut the Power and Keep Electrical Hazards Away From Water

Water and electricity are a dangerous mix. If water has reached outlets, light fixtures, or the electrical panel, cut the power before you go near it.

Stay on dry ground when you flip breakers. Do not step into standing water to reach the panel. If the panel itself is wet, leave it alone and call an electrician or your emergency plumber right away.

Keep these rules in mind:

  • Never touch an appliance that is sitting in water while it is plugged in
  • Unplug electronics only if you can reach them without stepping in water
  • Turn off power to the affected area at the panel if it is safe to do so

Limit Water Damage in the First Hour

Water spreads fast. Within the first hour, the goal is to protect what you can and remove standing water.

Move furniture, rugs, and valuables to dry areas. Lift items off wet floors. Use towels, mops, and buckets to soak up water. If you have a wet vacuum, use it on carpets and hard floors.

Open windows and run fans to speed drying.

GET STARTED NOW! →

Identifying a Frozen Pipe Burst in Winter

Calgary winters are hard on plumbing. A frozen pipe can split when the ice inside expands, and the burst may not show until the ice melts.

Signs of a frozen pipe include low or no water flow from a tap, frost on exposed pipes, and an unusual smell or bulge in a wall. If you suspect a freeze, shut off the water first. Then thaw the pipe slowly with a hair dryer or warm towels. For tips on preventing frozen pipes in Calgary homes, read our step-by-step guide. Never use an open flame.

If you find water after a thaw, treat it as a burst and follow the steps above. For tips on preventing frozen pipes in Calgary homes, read our step-by-step guide. A reader dealing with a winter burst will find it useful.

Document the Damage for Your Home Insurance Claim

Keep every receipt for emergency repairs, cleanup supplies, and temporary lodging. Most home insurance policies in Canada require prompt notice of a loss, so call your insurer soon after the burst. Ask what documentation they need before you throw anything away.

Calling a Licensed Plumber for Emergency Repairs

Once the water is off and the area is safe, call a licensed plumber. Ask for a clear quote before work begins.

HPG Mechanical offers plumbing services in Calgary. book a plumbing service

Pricing depends on the repair, the parts needed, and how much work is involved. For current prices or a quote, contact HPG Mechanical directly.

Booking Your Emergency Repair and Preventing the Next Burst With HPG Mechanical

A burst pipe is stressful. Keep your main shut-off valve labeled and check your pipes before cold snaps.

HPG Mechanical offers 24/7 emergency support and proactive maintenance. see our property manager services or contact HPG Mechanical to book an emergency repair.

We provide honest quotes before work starts. Reach out today and get your home back to normal.

Frequently Asked Questions

What should I do first when a pipe bursts?

Shut off the water supply immediately. Find the main shut-off valve and turn it clockwise until it stops. If you cannot find or turn the valve, contact a plumber.

How do I shut off the water to my house in Calgary?

Turn the main shut-off valve clockwise until it stops. Label the valve location for your household.

Should I turn off the electricity after a pipe bursts?

Yes, if water is near electrical outlets, a breaker panel, appliances, or light fixtures. Water and electricity together create a shock risk. Do not step into standing water to reach a panel. If the panel is dry and reachable, switch off the breakers for affected circuits. If you are unsure or water is near the panel, leave the area and call your electrician or emergency service before going back in. Keep electrical safety in mind until the area is fully dry and inspected.

Does home insurance cover damage from a burst pipe in Canada?

Most Canadian home insurance policies cover sudden and accidental water damage from a burst pipe, including repairs to the building and damaged belongings, but policies vary and some exclude damage from long-term leaks, lack of maintenance, or freezing when the home is unheated. Check your policy wording and any water damage limits or deductibles. Notify your insurer promptly, keep receipts and photos, and avoid discarding damaged items until the adjuster has reviewed them. Ask your insurer which emergency contractors they recommend.

GoogleAdd hpgmechanical.com as a preferred source on Google →